8266esp8266esp32espesp8285

WIFI chip ESP8285 - ESP8266 upgrade

ESP8285=ESP8266+1M Flash。 

Compared with ESP8266, it has a high temperature resistance of 125 degrees celsius! And the original ESP8266 source program can be transplanted intact.

ESP-M1 / M2 module core processor using cost-effective chip ESP8285. The chip integrates the enhanced version of the Tensilica's L106 Diamond 32-bit core processor with on-chip SRAM in a smaller package.


ESP8285 has full Wi-Fi

Network functions, not only can be applied independently, but also can be used as a slave to run on other host MCUs. When the ESP8285 hosting application, can be started directly from the external Flash. Built-in cache memory is not only conducive to improving system performance, but also optimize the storage system. In addition, ESP8285 can be used as a Wi-Fi adapter  only through the SPI / SDIO interface or I2C / UART port , applied to any microcontroller-based design.


1) the volume is ultra-small;

2) serial to WiFi;

3) wireless transmission;

4) long-range ultra-low power consumption;

5) can be an external antenna. 

6) high temperature, up to 125 ℃

7) compatible with ESP8266, the source can be used to transplant.


SOC characteristics

Built-in Tensilica L106 ultra-low power 32-bit microprocessor, the frequency support 80MHz and 160MHz, support RTOS l built-in TCP / IP protocol stack

Built-in 1-channel 10-bit high-precision ADC

Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO

The deep sleep maintains the current at 10uA and the current is less than 5uA

Wake up within 2 ms, connect and pass the packet

Standby power consumption less than 1.0mW (DTIM3)

Built-in 1M bytes of SPI Flash



Wi-Fi features

Supports 802.11 b / g / n / e / i

Support station, SoftAP, SoftAP + STA mode l support Wi-Fi Direct (P2P)

Support for CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration l P2P discovery, P2P GO mode / GC mode and P2P power management

WPA / PA2 PSK and WPS l 802.11 i Security features: pre authentication and TSN

Supports 802.11n (2.4 GHz) l 802.1h / RFC1042 frame encapsulation

Support seamless roaming

Support AT remote upgrade and cloud OTA upgrade l support Smart Config function (including android and iOS devices) module peripherals l 2xUART

1xADC l 1xEn

1x wakeup pin l 1xHSPI


1xI2C l1xI2S

Up to 10xGPIOs


Module size: 18mm × 18 ×1.8 mm


Operating temperature range: -40 ℃ -125 ℃


ESP-01M can be widely used in various occasions for networking, home automation, industrial wireless control, baby monitors, wearable electronics, infinite position sensing device, wireless positioning system, signal and other networking applications, networking applications is the ideal solution.



1092663243Aug 27,2017 19:01 PMAdd Comment

Comment

Popular Topics