Empower Your AI Innovations with Seeed's NVIDIA Jetson ODM Services

Seeed’s ODM Service empowers device makers, system integrators, independent software vendors, and solution providers with customizable support tailored to your specific hardware needs, including form factors, image flashing, and logo change. If you can’t find a suitable Jetson hardware solution, our experienced R&D team can also provide verified & compatible accessory choices for your specific application demands including cameras, voice speakers, storage expansion, wireless communication module etc.

Empower Your AI Innovations with Seeed's NVIDIA Jetson ODM Services

What's included in Seeed's ODM services for NVIDIA Jetson?

Customize your own <span class="font-bold">reComputer</span> and <span class="font-bold">reServer</span> with custom carrier board
Customize your own reComputer and reServer with custom carrier board
Learn More about Jetson Product
Image flashing service for <span class="font-bold">reComputer</span> and <span class="font-bold">reServer</span> series
Image flashing service for reComputer and reServer series
Customize with your logo on <span class="font-bold">reComputer</span> and <span class="font-bold">reServer</span> series
Customize with your logo on reComputer and reServer series
In-house R&D support for unique application demands

In-house R&D support for unique application demands

Customization capability includes but not limited to :

  • Add/rearrange I/O ports (additional USB, GPIO, UART,etc)
  • Add modules
  • Firmware flashing
  • 4G/5G module integration
  • Optimize Ethernet layout/change to Power-over-Ethernet (PoE)
  • NVMe storage expansion
  • Change to a waterproof casing
  • Customize a new product based on Jetson

Why Choose Seeed Studio for Your ODM Needs?

Faster Time to Market
Faster Time to Market
  • Using proven IP blocks from our Seeed product line shortens our design time
  • Our in-house engineering team provides end-to-end hardware and software support, including PCBA, mechanical design, DFM and DFA — all under one roof
  • Close collaboration with 100+ suppliers ensure stable material supply and shorten procurement cycle
  • We have established rapid prototyping processes and flexible production lines to achieve quick switch between small and large batches
  • Typical lead time to customize a NEW product: 8–24 weeks
100+ Market-ready Products Designed & Built
100+ Market-ready Products Designed & Built
  • We offer 8000+ SKUs, from raw materials to modules and finished devices to help you rapidly build your first prototype
  • Hundreds of Seeed products are available as reference designs
  • Seeed's product portfolio creates a large IP Pool that we draw from, enabling faster time to market and revenue for our customers
Flexible Customization Backed by Strict Quality Control
Flexible Customization Backed by Strict Quality Control
  • We recommend market-proven materials and technical solutions that align with customers' product positioning and market goals, balancing performance and cost to avoid budget waste
  • Our quality management is systematic and end-to-end, from design and sampling through production to delivery — not limited to final inspection. This prevents issues early and reduces costly late‑stage rework.

One-stop ODM Services

process timeline

Concept

Get Quotation

  • Introduction of Project
  • Specify Product Requirements
  • Sign Agreement

Design Verification Engineering Samples

  • Product Design
  • Design for Manufacturing
  • Design for Test
  • Quick Prototype
  • Prototype Testing

Finalize Design Golden Samples

  • Design Verification
  • Sample Build
  • Sample Testing

Pilot Run

  • New Product Introduction
  • Manufacturing process
  • Quality Control
  • Certification
  • Global Logistics

Life-cycle Management

  • Yield Management
  • Supply Chain Management
  • Batch Traceability

End of Life

Find Out More About NVIDIA Jetson

ODM Case Studies

Seeed Studio has accumulated rich experience in Jetson-based collaborations across a wide range of scenarios for video analytics deployment, including industrial automation, autonomous driving, smart retail, smart building, and garbage classification, etc. These engagements reflect our capabilities in tailored hardware design, integrated production, and on-time delivery, supporting partners in launching robust AI solutions with speed and confidence

Vision AI Drowsiness Alert System for Truck Drivers

Scenario

Our customer is an AI software provider offering solutions to logistics companies. As a large portion of traffic accidents are caused by fatigue driving, this customer comes up with a fatigue reminder based on computer vision. Seeed provided Jetson Nano module and a customized carrier board for this project.

Customization
  • LTE/GPS
  • Output: Speaker/Vibration Motor
  • Input: Camera, 6Dof, Button, Microphone
Services we provide
  • Design Service
  • Customize carrier board
  • Manufacturing Service
Vision AI Drowsiness Alert System for Truck Drivers

AI-powered waster recycling solution

Scenario

Our customer is dedicating to deliver AI-powered waste recycling solution in truck across European area. To enable the whole system to maintain good data communication in the operation of outdoor garbage trucks, the customer gave a requirement of transmissing modules add-on, and also make sure the connections between ports are not influenced by vehicle vibration on-road.

Customization
  • Wi-Fi+Bluetooth module add-on
  • TPM module add-on
  • Add industrial jumper on pin1 pin2 of the J8, avoiding removal by any vibration
Services we provide
  • Testing service
  • Manufacturing service
AI-powered waster recycling solution

Smart Recycling Assistant

Scenario

Our customer has developed a zero-touch, zero-waste smart waste recycling system that gamifies recycling to promote waste classification and diversion. Seeed provided customized edge computing devices for this project.

Customization
  • LTE
  • System flashing
Services we provide
  • Design Service
  • Testing services
  • Manufacturing Service
Smart Recycling Assistant

Request a Custom Quote or Product Inquiry

Use the form below to submit inquiries about ODM customization or any questions about the product. One of our product specialists will follow up with you promptly.

Your information will never be shared with any third parties under any circumstances.

Frequently Asked Questions

The MOQ depends on the level of customization requested. For light customizations, such as logo changes, packaging modifications, or firmware flashing, we do not impose a specific MOQ. For deep/custom product development, such as adding new functions or developing an entirely new product based on the NVIDIA Jetson, an MOQ will apply. The typical MOQ for such projects is 500 units, although this may be adjusted depending on the specific circumstances.

We do not recommend customization based on other schemes. Based on Seeed's existing products, we have accumulated rich design experience and manufacturing experience, which can deliver the products customers want more quickly and at lower cost, and enhance the user experience. Of course, if customers have specific demands, we also welcome to contact us by email at odm@seeed.cc.

We will contact the customer within 24 hours by email to clarify any customer requirements and provide guidance on the next steps of cooperation.

After project is kicked off, project manager will be responsible for communicating with the customer. The customer can contact our project manager by email for any requests. For complicated cases, we can communicate with the customer via phone or video at any time. Depending on the customer's needs, we can arrange weekly/bi-weekly phone/video meetings to maintain regular communication with the customer and synchronize project progress.

We understand that the first version of the sample is very important to the customer. We provide first sample as soon as possible to help the customer start internal validation. Based on our standard product's customized design, we deliver the first version of the sample in about 3-4 weeks, ensuring that the sample is functional. While the customer receives the sample for verification, we will continue to perform other testing and validation.

You can find the newest quality policy on Quality Policy for Custom Service. If you have any more questions, please contact the designated email: odm@seeed.cc.

You can find Seeed's payment policy on Payment and Pricing Terms for Custom Service. If you have any more questions, please contact the designated email: odm@seeed.cc.

We understand that there may be changes in customer requirements during the product verification process. As long as the general functions have not undergone major changes, we support modifying the design and re-sampling for verification. However, if there is a fundamental change in the product definition, we recommend starting a new customization case, which means re-quoting and evaluating the delivery time.

Seeed will deliver embedded firmware and software drivers according to custom hardware, as well as the code and guidance.

IP is owned by Seeed by default, and we promise that the customized design used for a particular customer is unique and exclusive, so the customer does not have to worry that the product customized by Seeed will be used by other customers. If the customer strongly requests ownership of the IP, we can negotiate the IP fee with the customer.

Seeed can provide enclosure customization services, including 3D printing and molding. The exact solution depends on your order quantity and application scenario; we will propose the most suitable option for you.

Customers can contact our project manager by email to request repeat orders. Our sales staff will continue to follow up on the order processing.

During product development, we conduct electrical performance testing, functional testing, performance testing, and reliability testing for each batch of sample build to ensure the quality of the design. We also provide customers with open test plans and test reports for review based on their needs.