Wiki
Handheld Monitoring System for Forest Patrol
A customized handheld monitoring system for outdoor environments, supporting long-range communication control and improving the efficiency of forest patrols.
Emergency Response Command
Earthquake Relief, Fire Alert, Geo-Hazard Response
A post-disaster data and device-management solution: build a local network first, then choose 4G, satellite, or another available link for backhaul.
Reliable Sensors
IP66, -40 to 85°C, years on a battery
Local Networking, Conditional Backhaul
Mesh locally without cellular; backhaul over 4G or satellite when available
Easy Deployment & Management
Grab the case and go: dozens of ready apps, Bluetooth setup
Scenarios & Products
Pain Points & Challenges
Disaster response needs data fast, but conventional monitoring gear is slow to haul in and set up — without gas or water-level readings, decisions run on guesswork.
Seeed's Solution
A carry-case emergency monitoring center: built-in local Wi-Fi and LoRa, connecting all kinds of sensors after simple setup.
- Out-of-the-box communication
- Rich expandability
- Convenient and reliable outdoor workstation
| Image | Product | Measurements | IP Rating |
|---|---|---|---|
 | S200 Wind Speed and Direction Sensor | wind speed 0~60 m/s (standard), 0~75 m/s (extended) wind direction 0~360° | IP66 |
 | S500 5-in-1 Compact Weather Station | temperature / humidity / barometric_pressure / wind_speed / wind_direction | IP66 |
 | S800 8-in-1 Compact Weather Station | air temperature / relative humidity / barometric pressure / wind speed / wind direction / PM2.5 / PM10 / noise | IP65 |
 | S1000 V2 10-in-1 Compact Weather Sensor | temperature / humidity / barometric pressure / light intensity / rainfall / wind speed / wind direction / PM2.5 / PM10 / CO2 | IP66 |
 | S700 V2 7-in-1 Compact Weather Station | air temperature / relative humidity / barometric pressure / light intensity / rainfall / wind speed / wind direction | IP66 |
 | S700-A 7-in-1 Weather Station (Radar Rain) | air temperature / relative humidity / barometric pressure / wind speed / wind direction / rainfall intensity (radar) / light intensity | IP66 |
 | S700-B 7-in-1 Weather Station (Solar Radiation) | air temperature / relative humidity / barometric pressure / precipitation intensity (optical) / wind speed / wind direction / global solar radiation / sunshine duration | IP66 |
 | S700-C 7-in-1 Weather Station (Solar + Radar Rain) | air temperature / relative humidity / barometric pressure / rain intensity (radar) / wind speed / wind direction / global solar radiation / sunshine duration | IP66 |
 | S2120 8-in-1 Weather Sensor | air temperature / humidity / wind speed / wind direction / rainfall / light intensity / UV index / barometric pressure |
Pain Points & Challenges
Communication infrastructure is down, teams lose each other, and coordination comes down to shouting.
Seeed's Solution
Our solution builds a low-power, long-range private wireless network for kilometer-level communication coverage, improving emergency response efficiency.
- 2-5km communication range without base stations
- Mesh networking for extended coverage
- Encrypted group/peer-to-peer communication
Pain Points & Challenges
In signal dead zones, the missing can't be found and rescuers themselves can drop off the map — search time stretches and risk climbs.
Seeed's Solution
Built on GNSS satellite positioning (GPS/BeiDou/Galileo) and low-power comms, tracking terminals for rescuers and stranded people in no-signal zones stream positions in real time, alerting automatically on deviation or lost contact.
- Satellite + Bluetooth integrated positioning
- Long-range data reporting with fewer gateways
- Unified device management platform
Hardware Selection
| Image | Product | Use Case |
|---|---|---|
 | Card Tracker T1000-A | Safety badge, GNSS/WiFi/BLE/Buzzer/SOS, with built-in sensors |
 | BC03 Indoor Bluetooth Beacon for Tracker | Indoor BLE beacon, battery life over 5 years |
 | Indoor Gateway(SX1302) | LoRaWAN indoor gateway, band by deployment country |
Not sure which to choose? See the full selection guide →
Scenario
Success Cases
FAQ
The solution uses off-grid communication that does not depend on carrier base stations: devices talk directly over 2–5 km without infrastructure, and mesh networking extends coverage hop by hop automatically, with encrypted group and point-to-point messaging. Carry the portable base station with the team — the network forms wherever you go.
Front-end sensors are low-power designs that run years on battery — no charging concerns within a rescue cycle. Gateways and command terminals support battery plus solar combinations for sites without mains power. Devices operate at -40°C to 85°C with IP66 protection, handling storms, dust, and intense UV.
Designed for grab-and-go use: comms modules, gateways, and common apps come pre-integrated in a portable kit — power on at the site and the network forms. Sensors and positioning terminals are configured via phone app over Bluetooth, no IT specialists needed. Arrival to basic capability online takes hours, not days.
Upkeep is light: core devices are industrial-grade, low-power designs. Routine care is just periodic power-on self-checks, battery status, and firmware updates — all doable over the app's Bluetooth connection. Some teams also use the gear day to day for forest patrol and fire-prevention monitoring, combining readiness with daily use so nothing sits idle.
Yes. The Seeed devices used in this solution can be customized with your own logo, enclosure, packaging and pre-loaded firmware, and existing models can be adapted to add or drop interfaces and features. See Customization Service for scope and process, or .
Didn't find your answer?
Contact Us
We Are Glad to Be Your Hardware Partner !